Down Arrow Up Arrow
F1 Felt F1 Felt

F1 White Felt

Recommended Uses:

SAE F-1 is suitable for oil retention in installations where the felt is not compressed, for feeding low viscosity or light oil, and where unusual strength and hardness are required. Washers, bushings, wicks, door bumpers, polishing blocks, and parts where wear and resistance to abrasion are required, are typical uses.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1"): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

Wool Content:

Minimum 95% wool

F1 Minimum wool content: 95%

95% Wool
F3 Felt F3 Felt

F3 Grey Felt

Recommended Uses:

SAE F-3 are recommended for vibration mountings and the same general purposes as SAE F-1 and where a felt of slightly lower quality is satisfactory.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

Wool Content:

Minimum 85% wool

F3 Minimum wool content: 85%

85% Wool
F5 Felt F5 Felt

F5 White Felt

Recommended Uses:

SAE F-5 & F-7 are recommended for dust shields, wipers, grease retainer washers, wicks, vibration mountings, and in uses where a resilient felt is required.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

Wool Content:

Minimum 95% wool

F5 Minimum wool content: 95%

95% Wool
F7 Felt F7 Felt

F7 Grey Felt

Recommended Uses:

SAE F-5 & F-7 are recommended for dust shields, wipers, grease retainer washers, wicks, vibration mountings, and in uses where a resilient felt is required.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

Wool Content:

Minimum 80% wool

F7 Minimum wool content: 80%

80% Wool
F10 Felt F10 Felt

F10 White Felt

Recommended Uses:

SAE F-10 & F-11 are recommended for grease and oil retention where the felt is confined and compressed in assembly. Also recommended for dust shields under less severe operating conditions where F-5 & F-7 are not required.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

Wool Content:

Minimum 95% wool

F10 Minimum wool content: 95%

95% Wool
F11 Felt F11 Felt

F11 Grey Felt

Recommended Uses:

SAE F-10 & F-11 are recommended for grease and oil retention where the felt is confined and compressed in assembly. Also recommended for dust shields under less severe operating conditions where F-5 & F-7 are not required.

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

Wool Content:

Minimum 87% Wool

F11 Minimum wool content: 87%

87% Wool
F13 Felt F13 Felt

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

Wool Content:

Minimum 75% Wool

F13 Minimum wool content: 75%

75% Wool
F15 Felt F15 Felt

F15 Grey Felt

F15 Felt available in blue n/p 125B

Available Thickness:

1/8 Inch (3.18mm)

3/16 Inch (4.76mm)

1/4 Inch (6.35mm)

5/16 Inch (7.94mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

5/8 Inch (15.88mm)

3/4 Inch (19.05mm)

7/8 Inch (22.23mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

Wool Content:

Minimum 55% Wool

F15 Minimum wool content: 55%

55% Wool
F26 Felt F26 Felt

F26 Grey Felt

Recommended Uses:

End uses: soft padding and packing felt.

Available Thickness:

1/8 Inch (3.18mm)

1/4 Inch (6.35mm)

3/8 Inch (9.53mm)

1/2 Inch (12.7mm)

3/4 Inch (19.05mm)

1 Inch (25.4mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/8 inch (3.18mm) to 1 inch (25.4mm)

Density:

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Wool Content:

Minimum 45% Wool

F26 Minimum wool content: 45%

45% Wool
F50 Felt F50 Felt

F50 White Felt

Recommended Uses:

These are firm felts similar to F1 and F3 except the thickness is 3/32" or less.

Available Thickness:

1/16 Inch (1.59mm)

5/64 Inch (1.98mm)

3/32 Inch (2.38mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/16 inch (1.59mm) to 3/32 inch (2.38mm)

Density:

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

Wool Content:

Minimum 95% wool

F50 Minimum wool content: 95%

95% Wool
F51 Felt F51 Felt

F51 Grey Felt

Recommended Uses:

These are firm felts similar to F1 and F3 except the thickness is 3/32" or less.

Available Thickness:

3/64 Inch (1.19mm)

1/16 Inch (1.59mm)

5/64 Inch (1.98mm)

3/32 Inch (2.38mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 3/64 inch (1.19mm) to 3/32 inch (2.38mm)

Density:

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

Wool Content:

Minimum 92% Wool

F51 Minimum wool content: 92%

92% Wool
F55 Felt F55 Felt

F55 Grey Felt

Recommended Uses:

Similar to F7 but thickness is less than 1/8". Used for sound deadening and anti squeak applications.

Available Thickness:

1/16 Inch (1.59mm)

3/32 Inch (2.38mm)

Density:

Most Dense

Least Dense

F1

Nominal (1”): 16.00 lbs/sq. yd.
Limits: 15.20 - 16.80 lbs/sq. yd.

F3

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F50

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F51

Nominal (1”): 15.60 lbs/sq. yd.
Limits: 14.41 - 16.79 lbs/sq. yd.

F5

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F7

Nominal (1”): 12.24 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F55

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

F10

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F11

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F13

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F15

Nominal (1”): 8.48 lbs/sq. yd.
Limits: 7.84 - 9.12 lbs/sq. yd.

F26

Nominal (1”): 7.20 lbs/sq. yd.
Limits: 6.48 - 7.92 lbs/sq. yd.

Available Thickness:

From 1/16 inch (1.59mm) to 3/32 inch (2.38mm)

Density:

Nominal (1”): 12.00 lbs/sq. yd.
Limits: 11.60 - 12.88 lbs/sq. yd.

Wool Content:

Minimum 75% Wool

F55 Minimum wool content: 75%

75% Wool